Ghini op 28 January 2014 · 11:36
Info over Plum splitboard binding:
The Plumsplitboard was designed by a passionate snowboarder and it was developed by engineers. Over the past three years the Plumsplitboard bindings have been in a constant evolution in our design office, it has come to life in our workshop and it has been tested on the Alps slopes.
It is manufactured out of high performance materials (Alu 7075 T6 and carbon) which are the most reliable ultralight materials. The first binding of Plumsplitboard, the FEYAN, is robust and incredibly easy and fast to split and unsplit.
We have reached our goal: It is easy to use, quick to operate and extremely efficient.
A new technology.
The binding Plumsplitboard has the “Talpsystem” technology.
The system is composed of 3 elements:
I.M.A (Interface Mode Ascent):
The friction is reduced thanks to the bracket. It is made of a high strength inox pin which is set on two pads of teflon.
The cramps are quick and easy to put on without even stepping out.
The poles can be used to operate the risers. The risers also automatically lock the heels (Heel-lock system).
I.M.D (Interface Mode Descent):
The elements on the skis which are used to hook the binding when switching to the riding mode.
Micro adjusting: (stances &angles +30°/-30°😉 super easy
PAD: The descent hooking device provides a large contact area with the binding when riding while it only has a limited contact area when touring.
The descent hooking device can be micro adjusted onto the puck: it is therefore compatible with a large range of splitboards.
The bindings can be locked by operating only one lever on the I.M.A et I.M.D.
The only system which tighten the skis together when you lock.
They are very quick and very easy to operate without even taking off your gloves.
The spoiler has 2 angle positions. Thanks to the ROW (ride or walk) you can switch from the touring mode (with a negative angle spoiler) to the riding mode (you must set it up beforehand) in one single move even after you have stepped out.
Flat base made out of Aluminium 7075 T6 block
Anodised Heel-cup ( Aluminium 6061)
Lock system : Slock of inox and lever of Aluminium 7075 T6
Integrated heel-block system
ROW (ride or walk) on spoilers
Spoilers : choice of carbon or injected plastic
The Plumsplitboard hooks are available in all mountain shops at 39 € (VAT include).
Sold in sets of 4.
Meer beelden volgen later..