Bono op 18 maart 2014 · 00:12
kwam dit bericht tegen
Service bulletin for inspection of Mammut / Snowpulse avalanche airbags
Follow-up inspections have shown that there is an assembly problem affecting individual Mammut/Snowpulse avalanche airbags from the Winter 2011/2012 and Winter 2012/2013 production seasons. The problem is an improperly screwed in connector between the deployment mechanism and the venturi valve.
Since Mammut cannot rule out that this problem could result in a loss of function in the event of use, we hereby request that all customers inspect the connection in accordance with the following instructions.
If customers identify a problem we advise them to discontinue use of the airbag immediately. If this is the case, please contact Mammut customer services to arrange a repair.
The recall affects Mammut and Snowpulse avalanche airbags with Inflation System 2.0 from the 2011/2012 and 2012/2013 production seasons. You will find instructions on how to determine the production season of your avalanche airbag below.
The recall for inspection does not affect avalanche airbags made before or after these seasons.
Mammut recommends all airbag owners to check the connection as part of their regular equipment check.
We understand the inconvenience caused to you.
We apologize for the inconvenience and thank you for your patience.
Mammut Sports Group
1. Determine whether your avalanche airbag is affected by this recall for inspection.
Check which production season your avalanche airbag is from.
You can determine the production season using the deployment mechanism.